
Air conditioning is the largest single load in most homes here during summer. The good news: a large share of that consumption is waste — dirty coils, leaking ducts, and thermostats set far lower than they need to be. Here are the changes that make a measurable difference.
Settings and habits
- Set 24°C instead of 18°C — each degree lower adds roughly 5–8% to consumption.
- Run the fan on AUTO or medium rather than turbo all day.
- Use the timer overnight instead of running at full load until morning.
- Close curtains on sun-facing windows during the hottest hours.
- Cool the rooms you use, and keep unused room doors shut.
Maintenance that pays for itself
- Wash indoor filters every two to four weeks in summer.
- Pressure-wash the outdoor condenser at least once a year.
- Keep the outdoor unit shaded and clear of walls, boxes and plants.
- Fix refrigerant leaks properly instead of repeat gas top-ups.
Building and equipment upgrades
- Seal window gaps, door gaps and wall sleeve openings around the pipework.
- Insulate exposed copper pipes and any ducting in hot roof spaces.
- Replace units over 10 years old with inverter models — inverter compressors modulate instead of cycling, typically saving 30–40% on cooling energy.
How to know it is working
Note your monthly kWh reading before and after the changes, and measure the temperature difference between the air going into the indoor unit and the air coming out. A healthy split system delivers about 8–12°C of drop. Less than that means the system is working hard for little cooling — and that is where money is being lost.
Want a technician to inspect efficiency, gas pressure and airflow on your units? Book a service visit with Matar Najaa Al Rashidi on 054 263 8908.
